Rocnel Aluminium Series Double Edge Adjustable Razor aka Alu-Sailor

paulusek

paulusek

Forum GOD!
I paid +-100 Euro fees in Czech Republic. I have number 7. What surprised me - the razor blade is only firmly clamped at point 0. From point 1 and above, there is about a 0.1 mm gap between the cap and the pad, so the razor blade is not pressed tightly. I was looking for some photos with a similar setup and on the Spanish forum Hosay18 reviewed several Rocnel Sailor models, and I found the same feature in the photos. So it will probably be a design feature. Do you have a similar experience with Rocnel Sailor?
 
paulusek

paulusek

Forum GOD!
This...Right side (but the support is symmetrical on both sides). If there is no blade in the shaver, the spring-loaded base touches the cap even above level 1. If I insert a blade, it is as if the springs do not have the strength to overcome the pre-tension of the blade. The base only springs the blade, but does not press it against the head firmly. Otherwise, the shaver shaves brilliantly, I have probably never shaved so deeply. WTG
Sailor.jpg
+ XTG++ATG on 4. ATG under the nose on 1.5 - 2. Finishing up difficult areas on 5.
 
You must log in or register to reply here.
Top